How Does The Top Camera Work In Equinox

When your vehicle approaches another vehicle too rapidly, the red FCA display will flash and sound several beeps. When this occurs, the brake system prepares for driver braking to occur more rapidly.

Keep to apply the brake pedal as the driving situation dictates.

The red FCA brandish will stay continuously illuminated if the vehicle ahead remains much too shut.

The Collision Alert control is on the steering wheel. Press Standoff ALERT to set the alarm timing to far, medium, near or off. The first push button press shows the current control setting on the DIC. Boosted push button presses volition change this setting. The called setting will remain until information technology is changed and will touch both the Collision Alert and the Tailgating Alert features. The timing of both alerts volition vary based on vehicle speed. The faster the vehicle speed, the farther away the alert will occur.

Consider traffic and weather condition conditions when selecting the alert timing. The range of selectable alert timing may not be appropriate for all drivers and driving conditions.

Unnecessary Alerts

FCA may sometimes set unnecessary alerts to turning vehicles, vehicles in other lanes, objects that are not vehicles, or shadows. These alerts are normal operation and the vehicle does not need service.

Other Messages

There are messages that may appear on the Commuter Information Center (DIC) in the musical instrument cluster to provide data about FCA.

Cleaning the System

If the FCA arrangement does not seem to operate properly, make clean the outside of the windshield area in front of the camera sensor before because taking the vehicle in for service.

Ultrasonic Parking Assist

For vehicles with the Ultrasonic Rear Parking Help (URPA) system, it assists the commuter with parking and avoiding objects while in R (Reverse). URPA operates at speeds less than viii km/h (five mph), and the sensors on the rear bumper detect objects upwardly to 2.5 yard (eight ft) backside the vehicle, and at to the lowest degree 20 cm (8 in) off the ground.

WARNING

The URPA arrangement does not find children, pedestrians, bicyclists, animals, or objects beneath the bumper or that are too close or besides far from the vehicle.

It is not available at speeds greater than 8 km/h (5 mph). To prevent injury, expiry, or vehicle damage, fifty-fifty with URPA, e'er check the area around the vehicle and cheque all mirrors before backing.

How the Arrangement Works

URPA comes on automatically when the shift lever is moved into R (Opposite). A single tone sounds to indicate the system is working.

URPA operates just at speeds less than 8 km/h (5 mph).

An obstacle is indicated past audible beeps. The interval between the beeps becomes shorter as the vehicle gets closer to the obstacle.

When the distance is less than 30 cm (12 in) the beeping is a continuous tone for v seconds.

To exist detected, objects must be at least xx cm (viii in) off the ground and below liftgate level. Objects must also be within ii.5 m (eight ft) from the rear bumper. The distance objects tin can exist detected may be less during warmer or humid weather.

Turning the System On and Off

The URPA system can be turned on and off using the infotainment organization controls.

When the system is off, PARK ASSIST OFF displays on the Driver Information Center (DIC). The message disappears subsequently a curt menstruation of time.

URPA defaults to the on setting each time the vehicle is started.

When the Arrangement Does Non Seem to Piece of work Properly

The following messages may be displayed on the DIC:

SERVICE PARKING ASSIST: If this bulletin occurs, bank check the following weather condition:

• The ultrasonic sensors are not clean. Go on the vehicle's rear bumper costless of mud, dirt, snow, ice, and slush. For cleaning instructions, see Exterior Care on page 10‑72.
• The park assist sensors are covered by frost or ice. Frost or ice can form around and behind the sensors and may not e'er exist seen; this can occur after washing the vehicle in common cold weather. The message may not articulate until the frost or water ice has melted.

If the to a higher place conditions do not exist, accept the vehicle to your dealer to repair the arrangement.

PARK ASSIST OFF: If the URPA arrangement does not activate due to a temporary condition, the message displays on the DIC. This can occur under the following conditions:

• The driver has disabled the system.
• A trailer was attached to the vehicle, or an object was hanging out of the liftgate during the terminal drive bicycle. In one case the object is removed, URPA volition render to normal operation.
• A tow bar is attached to the vehicle.
• The bumper is damaged. Have the vehicle to your dealer to repair the system.
• Other conditions, such equally vibrations from a jackhammer or the compression of air brakes on a very large truck, are affecting organisation performance.

Rear Vision Camera (RVC)

The vehicle may accept a Rear Vision Camera (RVC) system. Read this unabridged section earlier using it.

The RVC can assist the commuter when backing up past displaying a view of the area behind the vehicle.

WARNING

The RVC arrangement does not display children, pedestrians, bicyclists, animals, or whatever other object located outside the camera'southward field of view, beneath the bumper, or under the vehicle. Perceived distances may be different from actual distances. Do not back the vehicle using but the RVC screen, during longer, higher speed backing maneuvers, or where at that place could exist cross traffic. Failure to utilize proper care before bankroll may upshot in injury, death, or vehicle damage.

Always check backside and around the vehicle earlier backing.

An image appears on the radio screen when the vehicle is shifted into R (Reverse). The radio screen goes to the previous screen after approximately 10 seconds one time the vehicle is shifted out of R (Reverse).

To cancel the delay, do one of the following:

• Press a difficult key on the navigation organisation.
• Shift into P (Park).
• Reach a vehicle speed of 8 km/h (5 mph).

Turning the Rear Vision Camera System On or Off

To plough the rear vision photographic camera system on or off:

1. Shift into P (Park).
2. Printing the CONFIG push button.
iii. Select Display.
4. Select Rear Camera Options.
five. Select Camera. When a check mark appears next to the Camera pick, then the RVC organisation is on.

Symbols

The RVC system may have a feature that lets the driver view symbols on the radio screen while using the RVC. The Ultrasonic Rear Park Help (URPA) system must not be disabled to use the caution symbols. The mistake message Rear Parking Assistance Symbols Unavailable may display if URPA has been disabled and the symbols take been turned on.

The symbols appear and may cover an object when viewing the radio screen when an object is detected by the URPA system.

To turn the symbols on or off:

ane. Shift into P (Park).
2. Printing the CONFIG push button.
3. Select Brandish.
4. Select Rear Camera Options.
5. Select Symbols. When a bank check marker appears next to the Symbols option, symbols will announced.

Guidelines

The RVC system may have a guideline overlay that tin can assistance the commuter align the vehicle when backing into a parking spot.

To plough the guidelines on or off:

1. Shift into P (Park).
two. Press the CONFIG push.
3. Select Display.
four. Select Rear Camera Options.
five. Select Guidelines. When a check mark appears next to the Guidelines pick, guidelines will appear.

Rear Vision Camera Fault Messages

SERVICE REAR VISION CAMERA System: This bulletin tin display on the radio screen when the organization is not receiving information it requires from other vehicle systems.

If whatever other problem occurs or if a trouble persists, see your dealer.

Rear Vision Photographic camera Location

The camera is located above the license plate.

The area displayed by the camera is limited.

It does not display objects that are close to either corner or under the bumper and can vary depending on vehicle orientation or road conditions. The distance of the paradigm that appears on the screen is different from the actual distance.

The post-obit analogy shows the field of view that the camera provides.

1. View displayed by the camera.

1. View displayed by the camera.
2. Corner of the rear bumper.

When the System Does Not Seem To Work Properly

The RVC system may not piece of work properly or display a articulate prototype if:

• The RVC is turned off. See "Turning the Rear Vision Camera Arrangement On or Off" earlier in this section.
• It is dark.
• The sunday or the beam of headlights is shining direct into the camera lens.
• Ice, snow, mud, or anything else builds up on the camera lens.

Clean the lens, rinse it with water, and wipe it with a soft cloth.
• The back of the vehicle is in an blow, the position and mounting bending of the photographic camera tin change or the camera can exist affected. Be certain to have the camera and its position and mounting angle checked at your dealer.

Lane Departure Alarm (LDW)

For vehicles with this feature, read the entire department before using information technology.

Alert

The LDW system is an aid to help the vehicle stay in the driving lane. Information technology does not steer the vehicle.

The LDW system may not:

• Provide enough fourth dimension to avert a crash.
• Discover lane markings under bad weather conditions or if the windshield is dirty.
• Find lane markings and will not find road edges.
• Warn that the vehicle is crossing a lane marking if the organization does non find the lane mark.

If LDW simply detects lane markings on 1 side of the route, it volition merely warn yous when parting the lane on the side where it has detected a lane marking. Even with LDW, always keep your attending on the road and maintain proper vehicle position within the lane, or vehicle impairment, injury, or expiry could occur. Always proceed the windshield make clean and do not use LDW in bad weather conditions.

When the vehicle crosses a detected lane marking, the LDW indicator volition flash and 3 beeps will sound. LDW will not warn if the turn signal is on or if a sharp maneuver is made.

How the System Works

The LDW camera sensor is on the windshield ahead of the rearview mirror.

To turn LDW on and off, press the LANE DEPART button on the steering wheel. The control indicator will light when LDW is on.

When the vehicle is started, the LDW indicator on the instrument panel volition come on briefly.

LDW operates at speeds of 56 km (35 mph) or greater. If LDW is on, the LDW indicator will announced light-green if the system detects a left or right lane marking. This indicator will change to amber, flash, and three chimes will audio if the vehicle crosses a detected lane marking without using the turn signal.

To alter the volume of the warning chime.

When the Organization Does Not Seem To Work Properly

If the LDW symbol does not appear:

• The lane markings on the road may not exist seen.
• The camera sensor may exist blocked by dirt, snow or ice.
• The windshield may be damaged.
• The weather may be limiting visibility.

This is normal operation; the vehicle does not need service. Clean the windshield.

WARNING

If the LDW camera sensor is blocked by dirt, snow, or ice, or if the headlamps are not cleaned or properly aimed, or if the windshield is muddied or damaged, it may not find the lanes alee.

LDW may non assistance avoid a crash under these conditions. Continue the headlamps cleaned and properly aimed and the windshield clean.

LDW warnings may occasionally occur due to tar marks, shadows, cracks in the route, or other route imperfections. This is normal system operation, the vehicle does not demand service.

LDW Messages

FRONT Photographic camera BLOCKED, CLEAN WINDSHIELD: This message may announced because the front camera is blocked and cannot operate properly. It may besides activate during heavy rain or due to route spray.
LANE DEPARTURE SYSTEM UNAVAILABLE: This message may appear if LDW does not actuate due to a temporary condition.
SERVICE Forepart Photographic camera: This message may announced to indicate that LDW is not working properly.

If this bulletin remains on after continued driving, the organization needs service. Take the vehicle to your dealer.

Source: https://www.cheviman.com/cheq-46-object_detection_systems.html

Posted by: haneywhisight.blogspot.com

Share this post